11
Setup
Language
- Allows you to change the language of the menu.
TT Language
- Encoding settings for the proper display of
teletext characters.
Audio Languages
- Allows you to change audio language on
selected DVB channels.
Subtitle Language
- Allows you to change subtitles language
on selected DVB channels.
Hearing Impaired
- If signal provides support for the hearing
impaired, the subtitles can be displayed by pressing the
“Subtitle”. If you set Hearing Impaired ON and switch to a
channel with supports for hearing impaired subtitles will be
activated automatically.
Aspect Ratio
- Within the EU the picture format varies
depending on the channel/broadcast. There are a number of
diff erent options to best meet your needs.
Auto
Automatically displays the best picture
format. So the picture is in the correct
position. May have black lines at the top/
bottom and/or sides.
4:3
Displays the 4:3 picture in its original size.
Side bars are shown to fi ll the 16:9 screen.
16:9
Fills the screen with a regular 16:9 signal.
Zoom 1/2
The picture is the correct proportion but
zoomed in to fi ll the screen.
Full Screen
Stretch signal to fi ll the screen.
Blue Screen
- Changes the background when there is no input
between clear and a blue background (Only available on some
sources).
First Time Installation
- Starts the fi rst time installation.
Reset
- This resets the menus to factory settings.
Software Update (USB)
- From time to time we may release
new fi rmware to improve the operation of the television
(available to download). This menu lets you install the new
software/fi rmware onto the television. Further details of how to
do this will be issued with the fi rmware. Contact the helpline or
refer to the ‘www.umc-slovakia.sk/products-support/’ website.
HDMI CEC
- Allows you to operate devices conected via HDMI
with TV remote control.
Auto power
- Automatically turn on/off connected devices
via HDMI CEC
Device menu
- Allows you to acces devices menu and
operate the menu using TV remote control.
HDMI ARC -
Sends audio signal from terrestrial/satellite
broadcast via HDMI to the AV receiver without using any
additional audio cables, this functions is available only on
HDMI 2 output.
HDMI CEC must be supported by connected device.
PC Settings *
Auto Adjust
- Lets you automatically confi gure the television to
be used as a computer monitor.
H Off set
- Changes the horizontal position of the picture.
V Off set
- Changes the vertical position of the picture.
Size
- increase picture size.
Phase
- To adjust delay time of phase in order to reduce the
noise of picture
Position Reset
- Changes back to the original settings
Tip: If the computer is left in-active for a period of time, the
television will switch into a ‘sleep’ state (the screen will power
off to save power). To switch back on press the standby
button.
Tip: If you do not press any buttons for 10 seconds, the menu
will automatically exit. You can change the length of time
before the menu exits automatically - see ‘OSD Timer’ section.
* only for devices with VGA connector
TV Menu operation
