English
EN
11
Using more of your TV
This starts playback on your DVD device and
automatically switches your TV to the correct
source, displaying DVD content.
Using system standby
System standby enables you to press the
button on, for example, your TV remote control.
This switches your TV and all connected HDMI
devices to standby mode.
Network update
Press
Menu
on the remote control, then select
Options > Network update
. Select
On/off
to
enable or disable the Network update function.
- When this function is on, the TV will
automatically update channels if your DTV
service provider updates his DTV network.
- When this function is off, you need to run the
channel search again to get new channels or
remove unavailable channels if your DTV service
provider adds or removes channels from their
DTV network.
Common interface
Encrypted digital TV channels can be decoded
with a common interface module and a card
provided by a digital TV service operator.
The common interface module may enable
several digital services, depending on the
operator and services you choose (for example,
pay TV). Contact your digital TV service operator
for more information about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instruction described below. Wrong insertion of
a common interface module may damage both
the module and your TV.
1.
Following the directions printed on the common
interface module, gently insert the module into
the common interface slot on the TV.
2.
Push the module in as far as it will go.
3.
Turn on the TV and wait for the common
interface function to be activated. This may
take several minutes.
Note: Do not remove the common interface
module from the slot. Removing the
module will deactivate the digital services.
Accessing common interface services
After inserting and activating the common
interface module, press
Menu
on the remote
control and select
Options > Common interface
.
This menu option is only available if the common
interface module is correctly inserted and
activated. On-screen applications and content are
provided by your digital TV service operator.
Software update
Press
Menu
on the remote control and select
Options > Software update
. Press
OK
/
►
to enter.
(Refer to Figure 5.)
-
Current version
: Checks the current version of
the software.
-
Product name
: Displays the product name of
your set.
-
Serial number
(if available): Displays the serial
numb
er of your set.
-
OAD
(
Over Air Download
): Enables you to install
the latest version of the software if available.
Select
OAD
and press
OK
/
►
to enter.
• Use
◄
/
►
to select
Yes
under
Auto download
to automatically download the latest
software if available. After the software has
been downloaded successfully, you will be
prompted to decide if you want to install
it right now. If yes, follow the on-screen
instructions to complete your installation. You
can also select to ignore the installation here.
• Select
No
under
Auto download
to decline the
automatic download.
• Select
Manual OAD download
and press
OK
/
►
to start manual scanning the latest
soft
ware. Follow the on-screen instructions to
complete. During the scan, press
OK/Exit
to
cancel or exit the process.
Changing to Shop or Home mode
1.
Press
Menu
on the remote control and select
Options > Location
.
2.
Press
◄
/
►
to select your location
Shop
or
Home
.
3.
Press
Exit
to exit.
Note: According to the regulation of European
Commission 2009/125/EC, in Home
mode, TV will be put into standby mode
automatically if there is no operation in 4
hours. This feature can be deactivated in
Options
menu.
MHEG function
Some digital TV broadcasters offer dedicated
digital text or interactive services (for example,
BBC1). These services work like normal Teletext
with the addition of number, colour and
navigation buttons.
1.
Press
Menu
on the remote control and select
Options > Subtitle > Subtitle
.
2.
Press
◄
/
►
to set
Subtitle
to
Off
.
Note: MHEG and subtitles are mutually
exclusive and cannot coexist on the
same screen. If
Subtitle
is set to
On
,
MHEG will not appear.
3.
Press the red button or
TEXT
on the remote
control.
4.
Press
▲
/
▼
/
◄
/
►
to select or highlight items.
