English
EN
9
1.
Press
Menu
to display the main menu.
2.
Press
▲
/
▼
/
◄
/
►
to select
Setup
, then press
OK
to enter.
3.
Select
Language
and press
OK/
►
to enter.
4.
Select
Menu language
and press
◄
/
►
to select
your desired language to display the menus.
5.
Press
Exit
to close the menu.
Using more of your TV
Setting up your favourite channels
You can create
a list
of your favourite TV channels.
1.
Press
LIST.
2.
Press the yellow button to enter
Channel list
selection
.
Press
▲
/
▼
to select the favourite
list and press
OK
to enter.
3.
Press the blue button to start editing your
favourite list. Press
▲
/
▼
to scroll through the
channel list and press
OK
to select or deselect it.
4.
Repeat this procedure to setup other favourite
channels.
5.
Press
LIST/Exit
to exit.
Energy saving
1.
Press
Menu
on the remote control and select
Picture > ECO settings > Energy saving
.
2.
Press
◄
/
►
to select desired power saving
mode to achieve the desired power saving
effect.
3.
Press
Exit
to close the menu.
Shortcut operation
: Press
ECO
on the remote
control to perform the same function mentioned
above.
Motion enhance
(* not available for some models)
This function provides more sharpness to moving
pictures and launches the desired demonstration.
1.
Press
Menu
on the remote control and select
Picture > Advanced settings >
Motion enhance
.
2.
Press
OK
/
►
to enter.
3.
Select different options:
-
Effect
: Choose the high level to keep the
picture sharp at all times; however, very
small details may fade slightly at high speed.
You can also choose the low or middle levels
to reduce the motion compensation.
-
Demo partition
: Select the mode in which
you want to demo the effect of motion
enhancement.
-
Demo
: Start the demo by pressing
OK
/
►
.
4.
Press
Exit
to close the menu.
Audio description
Audio description refers to an additional narration
track for Blind and visually impaired viewers of
visual media, including television programmes
and movies.
Using your TV & Using more of your TV
Chapter 4 & 5
- Select
Digital
, then follow the same process
as above to start your automatic search
relating to all DVB-C digital channels.
- Select
Analogue
, then press
OK/
►
to
start your automatic search relating to all
analogue channels.
4.
The search may take a few minutes. During the
process, you can press
Menu
to abort halfway.
5.
Once the automatic search ends, press
Menu
to return to the previous step or press
OK
to
restart
your channel search.
6.
After the automatic search, channels are arranged
in a preset order. You can skip channels, modify
the preset order or rename channels.
Using your TV
Accessing channels
Using the
numeric
buttons:
press the
corresponding
numeric
buttons to access the
channels.
Using the PR+/- or P+/- buttons:
scroll through
the channels.
Watching connected devices
Repeatedly press
Source
on the remote control
or
OK
on the TV set to toggle between TV and
other input sources. To resume TV viewing, press
any
numeric
button to enter the channel, while
P+/-
will cycle through all TV channels and other
input sources.
Note: Not all models have
OK
button on the set.
Volume
Volume control: use the
VOL+/-
or
VOL
◄
/
►
buttons on the TV set or
V+/-
buttons on the
remote control to increase or decrease the volume.
Sound mute: press the
Mute
button to
temporarily mute the sound. Press this button
again or the
V+
button to restore it.
Using TV menus
1.
Press
Menu
to display the main menu. (Refer
to Figure 3.)
2.
Press
▲
/
▼
/
◄
/
►
to select the desired item,
then press
OK
to open the corresponding
submenu.
3.
In submenus, use
▲
/
▼
to select menu options,
use
◄
/
►
to set functions or change values.
Use
OK
to activate a setting. Use
OK/
►
to
open the corresponding submenu.
4.
Press
Menu
to return to the previous menu.
5.
Press
Exit
to close the menu.
Note: Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu language
following the instructions below.
