33
en
sTarTinG a washcycle
Draw out the lower and up per basket, load the dishes and push them back. It is commended to load the lower
1.
basket first, then the upper one (see the section entitled “Loading the Dishwasher”).
Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
2.
Insert the plug into the socket. The power supply is 220-240 VAC / 50 HZ, the specification of the socket is 10A
3.
250 VAC. Make sure that the water supply is turned on to full pressure.
Close the door, press the ON/OFF button, and the ON/OFF light will turn on. Turn the program knob to select a
4.
desired wash cycle, press the Start/Reset button , the machine will work after 10 seconds.
TurninG On The aPPliance
When you press the Start/Reset button to pause during washing, the running indicator light will stop blinking and the
dishwasher will mooing every minute unless you press the Start/Reset button to start.
nOTe:
Premise
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
1.
detergent may have already been released, and the appliance may have already drained the wash water. If this is
the case, the detergent dispenser must be refilled (see the section entitled "Loading the Detergent" ).
When you press the Start/Reset button more than 3 seconds, you can cancel the running programme and select
2.
other programmes (see the section entitled "Starting a wash cycle" ).
When you select Normal/Eco. Programmes, you can select the All in1 function.
3.
The Display window shows the state of the dishwasher:
4.
a) Running indicator light is off
stand by
b) Running indicator light is on and not blinking
pause
c) Running indicator light is on and blinking
run
If you open the door during a wash cycle, the machine will pause. The running indicator light will stop blinking and the
buzzer will mooing every minute unless you close the door. After you close the door, the machine will keep on working
after 10 seconds.
nOTe:
FOrGOT TO aDD a Dish
A forgotten dish can be added any time before the detergent cup opens:
Press the start/reset button.
1.
After the spray arms stop working, you can open the door completely.
2.
Add forgotten dishes.
3.
Close the door.
4.
Press the start/reset button, the dishwasher will run after 10 seconds.
5.
chanGe The PrOGraM
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off the
appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher. Wait for a few
minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more
susceptible to breakage. They will also dry better.
swiTch OFF The Dishwasher
Switch off the dishwasher by pressing the ON/OFF button.
1.
Turn off the water tap!
2.
OPen The DOOr careFully
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes before
removing from the appliance. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the
dishes. In this way they will be cooler and the drying will be improved.
unlOaDinG The Dishwasher
It is normal that the dishwasher is wet inside. Empty the lower basket first and then the upper one. This will avoid
water dripping from the upper Basket onto the dishes in the lower one.
aT The enD OF a washcycle
It is dangerous to open the door when washing, because the hot water may scald you.
warninG:
Содержание ODW 120
Страница 1: ...Gebrauchsanweisung User Manual GESCHIRRSPÜLER DISHWASHER ODW 120 DE EN ...
Страница 2: ......
Страница 3: ...English Deutsch 4 21 23 41 ...
Страница 42: ...Venalisia Import GmbH Wankelstrasse 5 D 85046 Ingolstadt ODW120_07 11 ...
