Ojocam OC-0900 Chameleon, Руководство пользователя

Страница: 9 / 13

14
|
English
|
15
English
Smartphone App Feature Cloud Mode Feature
Camera
Name
To rename the camera and set a password
Date and
Time
Synchronize time between smartphone and camera
Resolution Recording Resolution: FHD is the default value and records in
1080P Full HD. SHD is 1296P Super HD, which provides 3MP
playback video. Note that some smartphone don't support 1296P.
Operation
Sound
Toggle the dash cam’s button beep on/off
Factory
Settings
Reset camera to factory settings. This videos on the Micro SD
card remains intact.
Format SD
Card
Here you can fully erase the video on your SD card, and adjust
how much space you want to make available to loop recording in
Dash Cam mode. Drag the slider from left to right to set the ratio.
Language Choose your preferred language for Ojocam 0900
Internet
Setting
Here you can register a free cloud account so you can access your
camera from your smartphone from any where in the world.
Voice
Record
If you do not want the camera to record the audio with its internal
microphone, turn this setting off. (Dash Cam mode only)
Auto
Record
If this setting is enabled, the camera will automatically start
recording when it receives power from the car charger . (Dash
Cam mode only)
Screen
Auto Off
If this setting is enabled, the camera will automatically start
recording if it detected movement in view of the camera. Video
recording stops when there is no movement.
Delay
Power Off
Here you can set delay time after power is removed. Select 10
second delay or immediately off.
Impact
Sensor
Sets the sensitivity of the impact sensor (G-Sensor). Options
include High, Low, and Off. The impact sensor, when triggered,
will automatically lock files to prevent them from being
automatically detected by continuous loop recording.
1. Connect your camera to the smartphone App by using the Local
Mode (page 12)
2. Inside the smartphone app, tap on the setup tab at the bottom, and
scroll down to “Internet Setting”
3. Using Access Point (AP) tap the button labeled “Click here to
Add Cloud AP”
4. Tap WiFi name from the list. If your home network does not
show up in the list, tap “other” and enter WiFi name (SSID) and
password manually.
5. Tap the “Setup” button in the upper left to go back to setup
6. In the Email Box, Enter your email address. This is needed to help
protect your privacy, so only you can access your camera over the
cloud.
7. Tap the Green save button and hit OK
8. Exit the smartphone app, and your camera should return to the
video preview screen.
9. Turn on the WiFi loud in the Main Menu settings of the camera.
10. After you exit the settings, the camera will show the video
preview screen with a green cloud icon in the upper left corner.
11. Make sure your smartphone is now connected to the internet, via
the cellular network or via WiFi.
12. Open the OjoLink app, and tap on the Cloud Icon that says
“Internet”
13. The camera WiFi ID will appear in the list. The camera's live
video will be displayed in a short while.
To configure Cloud Mode