31
1. Debug display on the upper left of the spectrum screen
It is displayed when you set "5. Debug Disp" of "Setting" to ON.
Although only basic items are displayed here, it may be some hint.
2. Simultaneously press SW3 and SW5 to display the debug log
The debug log is displayed at the bottom of the screen while SW3
and SW5 are pressed at the same time.
You can see the latest 30 lines of debug log output.
3. Connect the terminal to the serial terminal and watch the log
When you start the terminal software on the PC with connecting
USB-serial module to CN3 (serial), you can see the log.
In method 2 above, it is up to 30 lines, but if you use terminal, you
can see all logs + additional information.
Memory can also read (note that if you access an address
where the memory does not exist, CPU stops due to a bus error).
７
-
３
. Debug display
When something is wrong, you can check the status in the following way.
Tranceiver Debug display
Press SW3 & SW5 simultaneously
