11
３
-
３
. Tranceiver
Memory write
You can save the current setting in memory.
The transmission state is not saved (it will be receivr mode when reading
memory later).
The memory has 100ch from 0 to 99.
Memory number 0 is the default setting. When power is turned on, ch0
setting is retrieved.
Hold down any of SW1 to SW4 and turn on the power, the memory
setting will not be reloaded. It does not retrieve default setting with
memory number 0 also.
1. Write to memory
Long press SW2 to display "Memory screen".
Set the channel number to be written with RE1.
· The already written channel number turns red.
· Unwritten channel number is white.
You can overwrite already written ch.
Press SW4 to write to the specified channel number.
When SW1 is pressed, writing is canceled.
Items stored in memory
freq
freqstep
band
MOD
RX GAIN
TX GAIN
AGC
DENOISER
LPF
AUDIO LO
AUDIO HI
SSB METHOD
HPF
notchfilter
micgain
pseudo stereo
speana span
speana ref
Memory screen
A red character indicates
a channel with data
