Sleep
Return
Leave
home
Wake up
p. 36
4-event clock mode/
automatic mode:
Comfort mode:
Manual mode:
Temporary override
To temporarily override any temperature in the 4-event schedule program, press the UP (
) button once, to show
the temperature in the display, and press UP (
) or DOWN (
) again to increase or decrease the temperature.
The display will flash for 5 seconds, and will then revert to the time. The override will operate until the next
programmed event when the thermostat will resume the automatic programme.
In automatic mode, the clock function symbol (
) and one of the 4-event symbols (
) will be
indicated. Programming page 17.
Cancel comfort mode (temporary override)
To cancel the temporary override, press the OK (
) button twice.
Permanent override:
During holidays, the scheduled 4-event program can be overridden.
Press the OK (
) button, and then the UP (
) or DOWN (
) button until the override temperature is set. The set
temperature will remain in the display and the unit will now operate to this temperature permanently.
Cancel manual mode
To cancel the permanent override state press the OK (
) button once, and the unit will resume automatic function.
5 secs.
Daily Use of the room sensor
4-Event Clock Mode
The day has been split into 4 events describing a typical day. When the room
sensor is in this 4-event mode it will change the temperature to the required level
automatically at the programmed times. As standard the room sensor has 5 days
with 4 events (two ON’s and two OFF’s), and 2 days with 2 events (one ON and one
OFF). For programming see page 17. Please, see page 18 - PRO - 4-event sequence
to alter the daily event sequence.
Содержание WLTA
Страница 1: ...p 1 Installation Manual WLM2 WLTA WLTD WLTP WLCT www oj dk 57641 01 08 LJE...
Страница 10: ...INSTRUCTIONS WLM Under oor Heating Controller BR965A30b p 10...
Страница 11: ...p 11...
Страница 12: ...p 12...
