OJ Electronics WLM2-1BA, Руководство пользователя

Страница: 5 / 32

5
QUICk GUIDE FOR MASTER MODULES
bA masters are pre set and need no adjustment - see “Factory settings” page 13
On the FS Master you can adjust the operating temperatures for any rooms which are not controlled
by a CT room sensor.
Setting day temperature
To adjust the day temperature (indicated by a sun in the display), press Ok button.
Now use the up and down buttons to select the temperature required, and press Ok button.
Setting remote night temperature
If a remote timer has been fitted by the installer, it is possible to automatically switch to a night
temperature.
To adjust the night temperature, press the up button until the moon is displayed and press Ok button.
Now use the up and down buttons to select the temperature required, and press Ok button.
Other advanced settings can be changed-See section “Master with display type WLM2”.
WLM2-1bA + WLM2-3bA
WLM2-1FS + WLM2-3FS
3
1
2
- Select “On” if this channel (room sensor) should be controlled by the WLCT2 room controller, or “OFF” if not.
- Now press Ok button to get to the next channel (CH 2) and repeat this step until all required channels have been selected “On”.
d. After all channels are set up, find the “ESC” menu entry and press Ok.
Nb: If different times and temperatures are required for other channels (room sensors) within the system, more than one WLCT2 room controller can be
used. Care must be taken to ensure that the action of selecting a channel “On” is not made on more than one WLCT2 room controller.
Setting program times and temperatures
Adjusting the program times and temperatures.
On Monday to Friday (day 1-5), the CT room controller operates a 4-event program (wake, leave, return, sleep), and on Saturday and Sunday (day 6-7),
2-events (wake and sleep). Each event can have a separate temperature & time.
Each event is indicated on the display by the symbols ( )
To adjust these settings:
a. Press Ok button for 5 seconds.
b. The display shows the wake up time for Monday to Friday.
c. To adjust the hours use the up and down buttons and press Ok.
d. Now adjust the minutes using the up and down button and press Ok.
e. Now adjust the desired wake up temperature using the up and down button and press Ok.
f. Now repeat b to e for the leaving time and temperature, the return time and temperature and the sleep time and temperature.
g. Now repeat b to e for Saturday and Sunday wake and sleep times and temperatures.
NB: To set up different types of event programs, change to Fahrenheit scale, change to AM/PM clock or change of other advanced settings - please
refer to the section Instructions WLCT2.
Q
ui
CK
gui
DE
s