Oilon EasyAce, Руководство пользователя, Страница: 7 / 36

Icons used in the Home view
Space heating Domestic hot water heating
The unit is on standby
and ready to start
In-line heater on Increase or decrease heating Error condition
In case of an error, check the alarms by tapping the Error icon. If
necessary, contact a repair service or Oilon customer services.
2.2 Heating
Heating circuits and their temperature
To change the heating circuit displayed in the
Home
view, tap the circuit’s number.
● In the figure, Circuit 2 is has been selected.
The
Heating circuit
window appears. Select
another circuit and tap
OK.
● In the figure, Circuit 1 has been selected. The
window shows the circuits that were enabled
during the heat pump’s installation.
Circuit 1
is now displayed in the
Home
view. If the heating circuit has no room temperature
measurement available, the display shows the icon
for increasing and decreasing heating (see sub-
section
Increase or decrease heating
).
M8004 2123EN 5 (31)