OHM CRED Mark 2 2-4, Руководство пользователя

Страница: 21 / 30

CRED Mark 2 2-4/2-6
Technical Specification
General
Inputs
Input Impedance
Maximum Input level
Outputs
Output Impedance
Maximum Output Level
Sample Rate
Frequency Response
THD
Dynamic Range
Serial Comms Data
Processing
Gain
Output Ch. Source
HP filter frequency
LP filter frequency
LP / HP filter type
Delay
Limiter
EQ frequency
EQ gain
EQ width
Connectors
Audio inputs
Audio outputs
Serial comms
Network comms
Mains
Mains Power
Consumption
Dimensions
Weight
two [CRED-2-4 & CRED-2-6}
> 10k Ohm Electronically balanced
+20dBu
four [CRED-2-4] or six [CRED-2-6]
<100 Ohm, ground balanced
+20dBu into 600ohm load
96kHz
10Hz to 40kHz, +/- 1.0dB (filters disabled)
10Hz to 20kHz, +/- 0.25dB (filters disabled)
<0.01%, (+10dBu, 20Hz to 20kHz, 30kHz bandwidth)
>111dB (A weighted, 22kHz bandwidth)
>108dB (un-weighted, 22kHz bandwidth)
38.4kbaud, format: 8 data, 1 stop, no parity
+20dB to -80dB and mute, 0.2dB steps
Input A, Input B and SUM
Off, 10Hz to 25.4kHz, 1/36 octave steps
10Hz to 25.4kHz and off, 1/36 octave steps
12, 18 & 24dB / octave Bessel and Butterworth, 12, 24 and
48dB / octave Linkwitz Riley and 4th or 8th order Hardman
Input 400ms, output 80ms
High performance limiter, adjustable threshold in 0.21dB steps,
automatic time constants
10Hz to 25kHz, 1/36 octave steps
+15dB to -15dB, 0.2dB steps
5.0 to 0.1 octaves bandwidth, 1/36 octave steps
3 pin female XLR
3 pin male XLR
9 pin female 'D type’
Future option
3 pin IEC
Universal switch-mode PSU, 85v to 250v AC, 50 / 60Hz
< 25watts
Height 1.75", 44mm
Width19", 482mm
Depth 10", 254mm
2.7 Kgs net
21