OHM ELECTRIC COOL CABI OCA-H1000BC-AW2, Инструкция по эксплуатации

Страница: 36 / 88

36
Packing
Mounting surface Cutouts
ixing bolt
Procedures for recessed mounting of laterally mounted Standard type
Not including Condensate-free type
Cut out the mounting surface in accordance with the respective mounting cutout drawing. ☞ See page 37
Detach the front panel from the COOLCABI. As the front panel is fixed with screws on the lower side with its upper
rim hanging on the main body, remove the screws first and then lift up the cover to detach.
3 Attach fixing bolts provided to the upper part of the COOLCABI.
4 Affix the provided packing all around the COOLCABI passing outside of the fixing bolts See the illustration below .
5 Align the COOLCABI from inside the enclosure to fit the cutouts. Pay attention to the drain pipe when fitting.
6 Secure fixing bolts on the lower side of the front panel from outside the enclosure. Number of bolts varies by model.
7 it the provided washers and nuts from outside the enclosure and secure them.
8 To ensure airtightness of the enclosure, caulk gaps as necessary.
9 Attach the front panel.
Put the provided “Alarm information label” on a readily visible place.
3 Procedures for recessed mounting of roof mounted Standard type
Cut out the mounting surface in accordance with the
respective mounting cutout drawing. ☞ See page 38
Affix the provided packing on the bottom surface of
COOLCABI See the illustration below .
3 Align the COOLCABI to fit the cutouts.
4 Insert the provided fixing bolts in the mounting holes from
outside the enclosure. Number of bolts varies by model.
5 Securely fix the COOLCABI using the washers and nuts.
6 To ensure airtightness of the enclosure, caulk gaps as
necessary.
7 Put the provided “Alarm information label” on a readily
visible place.
Caution
Two nuts are provided on top of COOLCABI for attaching eyebolts.
When lifting up a COOLCABI using eyebolts, be sure to use both of
these nuts to equalize the load.
Lifting up one side only can damage the COOLCABI.
Washer
COOLCABI
Nut
Spring washer
ront panel
ront panel fixing screw
Nut for attaching eyebolt
Mounting surface
Cutouts
COOLCABI
Nut
Spring washer
ixing bolt
Washer
Packing
ixing bolt
Layout of packing
Shaded area