23
8700-0006-000 (Rev. 12) 08/2020
10/Electromagnetic Compatibility Declarations for PTS Digital
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The PTS Digital is intended for use in the electromagnetic environment specified below. The user of the PTS
Digital should assure that it is used in such an environment.
Emissions Test Compliance
Electromagnetic Environment - Guidance
RF emissions CISPR
11
Group 1
The PTS Digital uses RF energy only for its internal functions.
Therefore, its RF emissions are low and are not likely to cause any
interference in nearby
electronic equipment
RF Emissions CISPR
11
Class A
The PTS Digital is suitable for use in all establishments other than
domestic establishments and those directly connected to the public
low-voltage power supply network that supplies buildings used for
domestic purposes.
Guidance and Manufacturer's Declaration - Electromagnetic Immunity
The PTS Digital is intended for use in the electromagnetic environment specified below. The user of the PTS
Digital should assure that it is used in such an environment.
Immunity Test
IEC 60601-1-
2 Test Level Compliance Level
Electromagnetic Environment -
Guidance
Electrostatic
Discharge (ESD) IEC
61000-4-2
±8kV Contact
±2 kV, ±4 kV, ±8
kV, and ±15 kV
Air
±8kV Contact, ±2 kV,
±4 kV, ±8 kV, and ±15
kV Air
Floors should be wood, concrete, or
ceramic tile. If the floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Radiated RF IEC
61000-4-3
3 V/m 80 MHz
to 2.7 GHz 80%
AM at 1 kHz
3 V/m 80 MHz to 2.7
GHz 80% AM at 1 kHz
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey*, should be
less than the compliance level in each
frequency range. Interference may occur
in the vicinity of equipment marked with
this symbol:
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
*Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios,
amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the mea
-
sured filed strength in the location in which the PTS Digital is used exceeds the applicable RF compliance level above, the PTS
Digital should be observed to verify normal operation. If abnormal performance is observed, additional measures may be neces-
sary, such as reorienting or relocating the PTS Digital.
10.1
