OHAUS TROOPER, Руководство по обслуживанию

Страница: 61 / 70

B-3
APPENDIX B - TROOPER COUNT SCALE TOOLS
• Print Headers Print Headers
Print Headers Print Headers
Print Headers
User-defined Printer Headers can be entered in the fields: Line 1 and Line 2 (up to 15
characters each). After entering the Printer Headers, click on the [Update] button to
save the text into the scale.
• Do Calibration after Config Do Calibration after Config Do Calibration after Config Do Calibration after Config Do Calibration after Config
Selecting this option (box is checked off) automatically initiates Linearity Calibration
procedures when Configuration parameters are ready to be transferred to the scale
(“Write Config Data to Scale” button is selected). Make sure appropriate calibration
weights are available at this time.
After transferring data to the scale, select [OK] from the following acknowledgement
screen. Follow subsequent calibration instructions accordingly.
Other Configuration Screen items are described as follows:
• Personality Setup and Menu Setup Personality Setup and Menu Setup Personality Setup and Menu Setup Personality Setup and Menu Setup Personality Setup and Menu Setup
These setup parameters designate scale model and menu mode settings, and are automati-
cally updated based on the Model and Metric Unit Setting selected. Sub-menu items cannot
be configured manually by the user.
• [Read Config Data from Scale] Button [Read Config Data from Scale] Button [Read Config Data from Scale] Button [Read Config Data from Scale] Button [Read Config Data from Scale] Button
Select this button to load and display the configuration data from the scale into the Trooper
Count Scale Tools program.
• [Write Config Data to Scale] Button [Write Config Data to Scale] Button [Write Config Data to Scale] Button [Write Config Data to Scale] Button [Write Config Data to Scale] Button
Select this button to transfer the configuration data from the computer to the scale. The transfer
is acknowledged on-screen as follows (if the “Do Calibration after Config” setting was not
selected):