OHAUS STARTER 300C, Инструкция по эксплуатации

Страница: 14 / 72

EN-10 STARTER 300C 300C Portable Conductivity Meter
4.4 Using the memory
4.4.1 Storing a reading
The STARTER 300C can store up to 30 results. Press when the measurement has
endpointed. M01 indicates that one result has been stored.
If you press when M30 is displayed,
FUL
indicates the memory is full. To store further data
you will have to clear the memory (see section 4.4.3)
4.4.2 Recalling from memory
Press and hold to recall the stored values from memory when the current measurement has
endpointed.
Press or buttons to scroll through the stored results. R01 to R30 indicates which result
is being displayed. Press to exit.
4.4.3 Clearing the memory
Continue pressing or buttons to scroll through the stored results until
MRCL
appears.
Then press ,
CLr
blinks. Press again to confirm the deletion or press to return to
the measurement mode without deleting the data.