OHAUS ST300, Руководство по обслуживанию, Страница: 15 / 29

CHAPTER 1 GETTING STARTED
Starter Series Portable Meter Service Manual 1-11 Ohaus Corporation www.ohaus.com
1.10 METER OPERATION
– ST400D
This section contains information on the basic operation of the Starter 3100C meter.
1.10.1 OVERVIEW OF THE CONTROLS
Displays
Figure 1-4. ST400D display
1 Time: HH:MM:SS
2 Date: YYYY-MM-DD
3
calibration data: |K-
1|
≤
0.3 and |B|<0.1
Probe condition is very good
calibration data: 0.3
≤
|K-
1|
≤
0.4 and |B| <0.1
Probe condition is acceptable.
4 Measurement icon - measurement (calibration) is running
5 Calibration icon - calibration is running
6
Power state icon, include power always on icon , means meter
will not automatically turn off; and auto-off icon which means
after 10 minutes no operation meter will turn off(see 4.4); power
state icon position is at the top-left of the battery status icon.
7 Battery status icon
– the charged status of the battery
8 DO reading: mg/L and %
9 Temperature during measurement or in calibration process
10 Barometric pressure during measurement or in calibration process
11 Data log: memory number
12 ppt for salinity entry