SKIPPER 6000
TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION
Ref:
30251574
16
A file with settings is created. The default name is ‘Config.bin’ but it can be renamed.
2.5.
Module configuration through settings file
Is possible configure the module with all parameters loading a settings file.
Follow next steps:
1.
Reset the module.
2.
Wait until the module will reset and restart
3.
Open a browser and go to address 192.168.0.254
4.
Enter user and password to access to module.
5.
From the main menu select “System Tools->Backup & Restore” and choose the
option select settings file.
When the file is selected click “Restore” and then in the window that it will be shown, click
OK.
The device will apply changes and will restart it automatically.
6.
Wait 60-70 seconds until the module be available again. Then check that the
configuration is loaded correctly in the ‘Status’ menu.
7.
If it is required that the IP be static and different in each module, go to menu
“Network->LAN” change the IP and click on “Save”.
