SKIPPER 6000
TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION
Ref:
30251574
12
2.4.
Device manual configuration
1. Connect the PC to the Scale by cable and reset the wifi module, for that hold the
reset button between 10-15 seconds.
2. Once pressed wait 60-70 seconds while the device is reset and restarted.
3. Open a browser and enter the address 192.168.0.254
4. Enter your username and password to access to device
User:
admin
Password:
admin.
5.
The device as default is configured as ‘Wireless Router’. On the Scale, ‘Client’
operating mode will be used. To change it, we have to access the menu "Working
Mode", select the option ‘Client’ and click ‘Save’.
A window will be shown to accept the change. Click on apply.
6. The module will restart and the changes will be applied automatically. When the
device is ready again, the menu will change, since there are options that are not
applicable in client mode.
7. To set to which network should be connected (SSID), enter to the menu
"Wireless-> Wireless Settings"
WIFINetwork
