OHAUS SJX323, Инструкция по эксплуатации

Страница: 11 / 124

SCOUT
TM
SJX SERIES BALANCES EN-9
3.10 Hold Mode
There are two modes for the display hold:
- Peak Hold: allows the user to capture and store the highest stable weight value (>=5d).
- Display Hold (default): allows the user to capture and store the first stable weight value (>=5d).
Start
If no weight value is held on the display, press
Function
key to begin. The [
rEAdY
] (Ready) will
be displayed until a weight is added on the pan.
When the stable value is being held on the display, the Hold icon (
H
) will blink and the displayed
weight will not change.
Reset
If the pan is empty and a weight value was held on the display, a single short press of the
Function
key will clear the held value and show the new weight on the pan.
1. Press and hold
Mode
until [ HoLd ] is displayed.
2. If required, place an empty container on the pan and press
Tare
. Zero value will then
display.
3. Press
Function
key to begin. The [ rEAdY ] (Ready) will be displayed.
4. Place samples to be weighed on the pan.
5. The stable value will be held on the display, the Hold icon (
H
) will blink.
4. MENU SETTINGS
The User Menu allows the customizing of balance settings.
Note: Additional Sub-Menus may be available if Interface Options are installed. See Interface
User Manual for the additional setting information.
4.1 Menu Navigation
User Menu:
Sub-Menus C.a.l S.E.t.U.P M.o.d.E U.n.i.t** E.n.d
User Menu Items: In.CAL*
A.CAL*
On/Off
CAL.Adj*
-100
..
0
..
100
Span
Lin
Reset
Yes/No
Filter
Low/Med/High
AZT
0.5/1/3/Off
StableRange
0.5/1/2//5
Backlight
Off/On/Auto
Auto Tare
Off/On/On-acc
Auto Off
Off/1/5/10
Reset
Yes/No
Weighing
On/Off
Counting
On/Off
Percent
On/Off
Check
On/Off
Totalize
On/Off
Density
On/Off
Hold
Disp/Peak/Off
Reset
g
kg
ct
oz
ozt
dwt
lb
grn
hkt
sgt
twt
t
tola/tical
End End End End
Note:
* These sub-menus are not available in SJX/E models.
** Available Units may vary by local regulations.
No/Back
Long press -
Enter menu
Short press -
Accept
Short press –
Go Next/Prev.
menu
Yes
Exit
Short press –
Exit
menu