count down function is complete and shaking function will cease.
5.
7XUQLQJXQLWRII
a. To turn the unit off, press the standby button. The speed and time displays
will be blank, the standby indicator light will illuminate. The Orbital/Microplate
Shaker should be kept in standby mode when not in use. To completely cut off
power to the unit, disconnect the power cord from the unit or unplug from the
wall outlet.
23(5$7,1*7,36
As a safety feature, a built-in program will shut power off to the motor if the tray is
prevented from rotating, or the unit is overloaded beyond its recommended weight
capacity.
Built-in memory maintains the last used speed and time settings during a power
'එඏඑගඉඔ2ඍකඉගඑඖඏ,ඖඛගකඝඋගඑඖඛඋඖග¶ඌ
10
$ඖඉඔඏ2කඊඑගඉඔ6ඐඉඓඍක2ඍකඉගඑඖඏ,ඖඛගකඝඋගඑඖඛ
The Standard Orbital Shaker is used for general laboratory shaking needs.
6KDNHU/LJKW'XW\6+/'$/
1.
*HWWLQJUHDG\
a. The speed knob should be at their extreme counter-clockwise position or at the
#1 on the dial.
b. Make sure the rocker switch is in the off position.
c. Plug the cord into a properly grounded outlet.
2.
6HWWLQJVSHHG
a. To run push rocker to the on or position. Set speed knob to desired setting
and adjust if necessary. Unit will run until you move the rocker switch to the off
position. The microprocessor speed control slowly ramps to set speed to avoid
splashing.
3.
7XUQLQJXQLWRII
a. To stop shaking function, turn the speed knob to the extreme counter-clockwise
position and push the rocker switch to the standby position. The shaker should
be kept in the standby position when not in use. To completely cut off power to
the unit, disconnect the power cord from the unit or unplug from the wall outlet.
23(5$7,1*7,36
Centering your sample and even weight distribution on the tray helps with balance
and stability.
The shaker will automatically restart after a power interruption.
EN
www.
GlobalTestSupply
.com
Find Quality Products Online at:
