OHAUS Scout 30268986, Инструкция по эксплуатации

Страница: 3 / 92

EN-2 Ethernet Interface
SETUP DEFINITIONS
Menu Settings Explanation
PRINT / A. Print
– Off
Only sends data when PRINT is pressed.
PRINT / A.Print / On.Stable
– Load,
Load.Zero
Balance only transmits stable data.
Load : Print stable value excluding zero
Load.Zero : Print stable value including zero
PRINT / A.Print / interval - (xx) sec Balance sends data every (xx) seconds.
PRINT / Auto Print
– accept
Balance only sends stable accept data in Check
mode.
PRINT / A.Print
– Continuous
Balance repeatedly sends data as fast as
possible.
PRINT / Content
On: print relevant content after weighing data
Gross
– on: G; Net – on: N; Tare – on: T;
Info
– on: balance will print application mode
setting parameters
PRINT / Layout / Format - (Single,
Multi) Single : print all data in one line
Multi : print all data in multiple lines
PRINT / Layout / Feed - (Line, 4
Lines, Form)
Line : feed one line after printing
4 Lines : feed four lines after printing
Form : feed one page after printing (move to the
top of next page after printing)
Ethrnt / IP Adr
Displays the balance's IP Address
U
se the “No” and “Back” keys to show the entire
number on the display
Ethernet Connection
The Interface has a preset IP Address. The Port Number is always 9761 and
cannot be changed. For more Ethernet configuration, please refer to the Section
Ethernet Configuration.
For STX Balances:
Upon installation, the STX balance will show the Ethernet icon ( ) in the upper
right corner.
Menu added Function
Communication
|--Ethernet
|--Ethernet Settings
|--Print Settings
For more info, please refer to the STX instruction
manual.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com