OHAUS RANGER 4000 Series, Инструкция по эксплуатации

Страница: 33 / 41

EN 31 Ranger
™ 4000 Series
7.2 Drawings
Figure 7-1. Dimensions
7.3 Communication
The scale is equipped with an RS232 interface (COM1) located under the Options Cover.
Connecting the scale to a computer enables you to operate the scale from the computer, as well
as receive data such as displayed weight.
7.3.1 Interface Commands
The scale supports both MT-SICS and OHAUS commands. Commands listed in the following
tables will be acknowledged by the scale. To use the MT-SICS commands, send the command
PSI. To return to the OHAUS commands, send the command POH
TABLE 7-2
Command Function
IP Immediate Print of displayed weight (stable or unstable).
P Print displayed weight (stable or unstable).
CP Continuous Print.
SP Print on Stability.
xS
0S: Turn off “Stable Only” menu item and allow unstable print. 1S: Turn
on “Stable Only” menu item and only print stable print.
xP Interval Print x = Print Interval (1-3600 sec), 0P turns auto print OFF.
Z Same as pressing Zero Key.
T Same as pressing Tare Key.
xT
Download Tare value in grams (positive values only).
Sending 0T clears tare (if allowed).
PU Print current unit: g, kg, lb, oz, lb:oz
xU Set scale to unit x: 1=g, 2=kg, 3=lb, 4=oz, 5=lb:oz
xM Set scale to mode x. M will scroll to next enabled mode.
PV Version: print name, software revision and LFT ON (if LFT is set ON).
H x “text”
Enter Header line
, where x = line number 1 to 5, “text” = header text up to
24 alphanumeric characters.