OHAUS RANGER 4000 Series, Инструкция по эксплуатации

Страница: 17 / 41

EN 15 Ranger
™ 4000 Series
Reset [
reset
]
Reset the Setup menu to factory defaults.
NO = not reset
YES = reset
Power on unit [
pwWr.UN
]
Set the unit of measure displayed at startup.
AUTO = last unit in use when turned off
kg = kilograms
g = grams
lb = pounds
oz = ounces
lb:oz = pound ounces
Zero Range [ ZErO ]
Set the percentage of scale capacity that may be zeroed.
2% = zero up to 2 percent of capacity
10% = zero up to 10 percent of capacity
Auto Tare [
A.tArE
]
Set the automatic tare functionality.
OFF = Automatic Tare is disabled
ON = the first stable gross weight is tared
ON-ACC = stable gross loads within the accept limits are tared (in Check weighing mode)
Beeper Signal [ Bp.sIG ]
Set how the beeper responds in Check Weighing mode.
OFF = the beeper is disabled
ACCEPT = the beeper will sound when the weight is within the Accept range.
UNDER = the beeper will sound when the weight is below the Under setting.
OVER-
UNDER = the beeper will sound when the weight is above the Over setting.
OVER = the beeper will sound when the weight is below the Under setting or above the
Over setting.
Beeper Key [
BP.key
]
Set whether the beeper sounds when a button is pressed.
OFF = no sound
ON = sound
Accumulation [
aCCUmM
]
Set the accumulation functionality.
OFF = accumulation disabled
AUTO = automatic accumulation
MAN = manual accumulation