OHAUS RANGER 4000 Series, Инструкция по эксплуатации

Страница: 21 / 41

EN 19 Ranger
™ 4000 Series
Reset [
reset
]
Reset the Print menu to factory defaults.
NO = no reset
YES = reset
Stable Only [ Stable ]
Set the printing criteria.
OFF = values are printed immediately
ON = values are only printed when the stability criteria are met
Auto Print [ A.Print ]
Set the automatic printing functionality.
OFF = disabled
ON.STAB = printing occurs each time the stability criteria are met
INTER = printing occurs at the defined interval
ACCEPT = printing occurs continuously
CONT = printing occurs each time the display is within the Checkweigh accept
range and stability criteria are met.
When ON.STAB is selected, set the condition for printing, where:
LOAD = printing occurs when the load is stable and greater than zero
LOAD.ZR = printing occurs when any load is stable and equal to or greater
than zero.
When INTER is selected, set the Print Interval.
1 to 3600 (seconds)
Content [
CONtNt
]
Define the content of the printed data.
Result
Set the status.
OFF = disabled
ON = the displayed reading is printed