OHAUS R41ME15, Инструкция по эксплуатации

Страница: 30 / 35

Ranger 4000 Count Series EN 29
Command Function
)
MT-SICS Commands
Command Function
LEVEL 0 @ Reset the scale
I0 Inquiry of all available SICS commands
I1 Inquiry of SICS level and SICS versions
I2 Inquiry of scale data
I3 Inquiry of scale software version
I4 Inquiry of serial number
S Send stable weight value
SI Send weight value immediately
SIR Send weight value repeatedly
Z Zero the scale
ZI Zero immediately
LEVEL 1 D Write text into display
DW Weight display
SR Send and repeat stable weight value
T Tare
TA Tare value
TAC Clear tare
TI Tare immediately
7.3.2 Connections for RS232
The 9-
The pin connections are as follows:
Active pins: PIN 2 = TXD, PIN 3 = RXD, PIN 5 = Ground
Figure 7-2. RS232 Pins
7.4 Printouts
The following sample print outs are generated by the Print
print command. The content of the printout is defined in the Print Content menu item. A
maximum of 24 characters can be printed on each line.
Description Comment
Part Number line If Printx Content P/N is ON
Result line
If Printx Content Result is ON
Gross value line
If Printx Content Gross is ON and a tare value is entered
Net value line If Printx Content Net is ON and a tare value is entered
Tare value line If Printx Content Tare is ON and a tare value is entered
Information line
If Printx Content Info is ON
Accumulation line If Printx Content Accu is All
Accumulation line If Printx Content Accu is All
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com