OHAUS GT 210, Инструкции по применению и установке

Страница: 65 / 121

26
OPERATION
Fill Guide (Cont.) Fill Guide (Cont.) Fill Guide (Cont.) Fill Guide (Cont.) Fill Guide (Cont.)
Reference Number Reference Number Reference Number Reference Number Reference Number
If reference number was selected under the Fill Option submenu with the balance in
a weighing mode, proceed as follows:
1. .
2. . Set the flashing digit to the desired weight
value.
3. until the first digit is correctly displayed.
4. to accept the digit.
5. Repeat steps 3 and 4 until all digits are set. When the last digit is entered ,
the balance is automatically in the fill mode.
6. The fill mode can now be used by placing samples on the pan. If the sample
weight equals the reference weight, the bar graph indicates 100%, the weight
is displayed.
7. to exit the fill option mode.
8. , the balance is now in a weighing mode.
High Point High Point High Point High Point High Point
High Point is
enabled only enabled only enabled only enabled only enabled only
when High Point Function is selected under the Setup
menu. Refer to page 46. High point is a feature which permits a number of samples
to be weighed with the balance
storing the lowest storing the lowest
storing the lowest storing the lowest
storing the lowest
sample weight and the
highest highest
highest highest
highest
sample weight sample weight sample weight sample weight sample weight
. The samples which are in between the low and high points are
disregarded and not displayed.
NOTE NOTE NOTE NOTE NOTE: When using this function, the balance does not respond to weights below 100
digits.
With the balance in a weighing mode, proceed as follows:
1. . , LIMIT is dis-
played, indicating the function is on.
2. Place the first sample on the balance pan. When the balance has stabilized,
the weight is displayed. Remove the weight.
3. Place a second sample on the pan. After the balance stabilizes, the second
sample weight is displayed if it is greater than the first sample. This procedure
can be continued with a number of samples. The highest weight sample is
always displayed.