SERVICE INSTRUCTIONS
Ohaus Corporation www.ohaus.com
3-11
FC5706 Service Manual
3.3.7
Removing the lid
Open the lid as wide as possible.
Hold the lid with one hand and remove the fixing screws of the hinges (see figure 28).
The lid can now be removed completely.
Figure 7
3.3.8
Replacing the hinges
Remove the lid as described in chapter 3.3.7.
Lay the lid with the upper side down on a smooth under packing to avoid any scratches.
Loosen the screws of the respective hinges on the inner side of the lid and replace the
hinges.
Figure 8
Reassemble the unit in reverse order.
Make sure the lid rests on the lid gasket straight and continuous. Tighten the fasting screws
firmly at the backside of the unit after the adjustment
remove
Fixing screws
3-9
