OHAUS Frontier FC5515R, Руководство по обслуживанию

Страница: 31 / 65

CHAPTER 2 SERVICE MENU
FC5515R Centrifuge Service Manual 2-9 Ohaus Corporation www.ohaus.com
Figure 22: Store
Note : After all points have been reviewed and/or set up, you have to
press shortly the key start (3) to store all parameters. Otherwise the
setups were all for nothing. If the storage has been successful in the
display “rpm/rcf“ (A-1) the value of the imbalance sensor and the word
“StorE“ are indicated.
2.1.11 Submenu Setup of the Signal Melody
Here you can setup the volume of the loudspeaker in case the signal generator is activated.

Activate the operation menu as described in chapter 2.1.1.

Turn the potentiometer (12) until the special digit “service“ appears in the display
”acc/dec” (A-2).
Figure 23: Sebmenu Singal Melody

By pressing t
he key rpm/rcf the display “rpm/rcf“ is now activated and you can setup the
respective option with the potentiometer.

At the end of the run you can now hear the audible sound in the setup volume whereas 0
is the most quiet setup and 9 the loudest one.