CHAPTER 2 SERVICE MENU
FC5515R Centrifuge Service Manual
2-1
Ohaus Corporation www.ohaus.com
2.1 SERVICE MENU
The operation menu helps the service personnel to locate defects. It is divided in two parts,
which are graded in several areas again from chapter 2.1.1 to 2.2.3.
Part 1
is accessible for the
USER
and different points can be read respectively settled. This is
also described in the instruction manual.
Part 2
is for internal use respectively for OHAUS trained service personnel only.
2.1.1 Activation of the Operation Menu (part 1)
The menu can be started as follows:
Open lid of the centrifuge and switch off main switch.
Press the key „time“ (7) and „door open“ (10) hold them and at the same time switch on
the unit.
Figure 8
After the indication displays flash on, let go of the keys „time“ (7) and „open door“ (10).
In the display “rpm/rcf“ (4) the stored type of the centrifuge (i.e.
5515
see figure 8) and below a
letter (i.e.
c
) is indicated for about 2 seconds. The letter stands for the different versions of the
units which are currently stored in the control board:
c
for
cool
h
for
heat
no
for
nothing
Содержание Frontier FC5515R
Страница 2: ......
Страница 38: ...CHAPTER 2 SEVICE MENU Ohaus Corporation www ohaus com 2 16 FC5515R Centrifuge Service Manual Figure 33 Store...
Страница 64: ......
