OHAUS Defender I-D33P15B1R1, Инструкция по эксплуатации

Страница: 56 / 84

EN-54 Defender 3000 Indicators
9.3 Appendix C
Commands listed in the following table will be acknowledged by the scale.
The
scale will return “ES” for invalid commands.
Please add \r\n after each command to send.
（
\r refers to \return ; \n refers to \newline)
OHAUS Commands
Command Function
P Print displayed weight (stable or unstable).
IP Print displayed weight immediately (stable or unstable).
CP Print weight continuously.
SP Print weight when stable.
Z Same as pressing Zero Key.
T Same as pressing Tare Key.
TA Set/inquiry of tare weight value.

Set: TA tare value unit
Example: TA 5 kg

Inquiry: TA
U
Set/inquiry current display unit.

Set: U unit ID
Example: U 1
Please check the following table 9-1 for the ID of each unit.

Inquiry: U
M
Set/inquiry current application mode.

Set: M application ID
Example: M 0
Please check the following table 9-2 for the ID of each application.

Inquiry: M
PSN Print indicator's serial number.
CU
Set/inquiry Under Limit (only in Check mode).

Set: CU under value unit
Example: CU 5 kg

Inquiry: CU
CO
Set/inquiry Over Limit (only in Check mode).

Set: CO over value unit
Example: CO 6 kg

Inquiry: CO
#
Set/inquiry Counting APW.

Set: # APW value unit
Example: # 6 kg

Inquiry: #
PV Print name, software revision and LFT ON (if LFT security switch is turned ON).
H x "text"
Enter print output string, x = string number (1-5), "text" = string text up to 40 alphanumeric
characters.
Note :

The italic content in each command needs to be filled with actual value.

Space in each command is needed. Please pay attention to it when input commands.
Unit ID Unit Name Abbreviation
0 Gram g
1 Kilogram kg
2 Ton t
7 Pound lb
8 Ounce oz
20 Pound:Ounces lb:oz
Application ID Unit Name
0 Weighing
1 Counting
3 Check
6 Totalization
Table 9-1 Unit ID Table 9-2 Application ID