OHAUS Defender I-D33P15B1R1, Инструкция по эксплуатации

Страница: 39 / 84

Defender 3000 Indicators EN-37
4.6.2 Print Menu
Enter this menu to set printing parameters. Default settings are bold .
Menu Sub-Menu
Sub-
Menu (in
segment)
Options
Options (in
segment)
Print
(
P.r.I.N.t.I
)/
Assignment
ASSIGN
Demand , Auto On Stable,
Auto On Accept,
Interval(seconds), MT-
Continuous, OH-
Continuous, SICS
DemMaN
,
ON.Stab
,
ON.ACep
,
INter
,
mMt.CON
,
OH.CON
,
SICS
Stable Weight Only
[Demand]
Stable
Off , On(LFT Force On)
OFF
,
ON
Mode
[Auto On Stable]
mMODE
Load , Load and Zero
LOAD
,
LOAD;2r
Time
[Interval (seconds)]
tImME
1 ~5000
/
Checksum
[MT-Continuous]
C.SUmM
On, Off
ON
,
OFF
Link to
[OH-Continuous]
lINktO
Off , Custom 1, Custom 2
Off, CUst1,
CUst2
Template
tEmMp
Custom 1 , Custom 2
CUst1
,
CUst2
Reset
reset
no , yes
NO
,
yes
End
End
/
/
Note : / refers to not applicable in the table above.
Reset
[
reset
]
Reset the Print menu to factory defaults.
NO
= do not reset.
YES
= reset
Assignment
[
ASSIGN
]
Demand
[
dEmMAN
]
If Demand is selected, the sub-menu Stable Only will display.
Set the printing criteria.
OFF
= values are printed immediately, regardless of stability.
ON
= values are printed only when the stability criteria is met.
Auto On Stable
[
ON.StAb
]
If Auto On Stable is selected, the sub-menu Mode will display.
Set the printing mode.
Load
= prints when the displayed load is stable.
LOAD;2r
= prints when the displayed load and zero reading are stable.
Auto On Accept
[
ON.ACEP
]
If Auto On Accept is selected and the weighing mode is Check , values will be printed when the weight is
accepted.
ON.ACep
= printing occurs each time the display is within the Accept range and stability criteria is met.
Interval
[
IntEr
]
If Interval is selected, the sub-menu Time will display.
IntEr
= printing occurs at the defined time interval.
Settings of 1 to 5000 seconds are available. Default is 1.
Printing occurs at the defined time interval.