EN-5
Valor 2000 Series Scales
2.5 Initial Calibration
When the scale is operated for the first time, a Span calibration is recommended to
ensure accurate weighing results. Before performing the calibration, be sure to have
the appropriate calibration weight.
Refer to section 4.2 for Span calibration procedures.
3. OPERATION
3.1 Turning Scale On/Off
To turn the scale on, press the
ON/ 0/T Off
button. The scale performs a display test,
momentarily displays the model/software version, and then enters the active
weighing mode.
To turn the scale off, press and hold
ON/ 0/T Off
button until OFF is displayed.
3.2 Zero Operation
Press the
ON/ 0/T Off
button to zero the weight display. The scale must be stable to
accept zero operation.
3.3 Manual Tare
Place a container on the weighing pan, then press
ON/ 0/T Off
. The display will
show a net value of “0”. To clear the Tare value, press
ON/ 0/T Off
with the pan
empty.
3.4 Changing Units of Measure
Press the
UNITS/Menu
button to display the next available measuring unit. Only
measuring units enabled in the Unit Menu will be displayed (refer to Section 4.4).
4. SETTINGS
The Menu allows the user to customize scale settings.
4.1 Menu Navigation
Press and hold
UNITS/Menu
button until MENU is displayed, then release it.
Press
Yes
to enter the displayed menu or press
No
to advance to the next menu.
When viewing the menu setting, press
Yes
to accept the setting, or press
No
to
change it, then press
Yes
to accept the setting and move to the next menu. When
End is displayed, press
Yes
to exit the menu.
Содержание CS 2000
Страница 2: ......