ohanadepot.com Fire Pit Table 5
WARNING
You must provide propane gas and a propane cylinder. Use a standard 20 lb. Propane cylinder
only.
Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the
Standard for Storage and Handling of Liquified Petroleum Gas, ANSI/NFPA 58. Your local library
or fire department should have this book.
The minimum permissible gas supply pressure of 10 W.C. is required for the purpose of input
adjustment.
The minimum hourly of 55,000 BTU is required input rating for a heater for automatic operation
at ratings less than full input rating.
The pressure regulator and hose assembly supplied with the appliance must be used.
The installation must conform with local codes, or in the absence of local codes, with National
Fuel Gas Code, ANSI Z223.1.
A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your
cylinder supplier. Never use a propane cylinder with a damaged valve connection.
The cylinder used must include a collar to protect the cylinder valve.
Do not store a spare LP Gas cylinder under or near this appliance.
Never fill the cylinder beyond 80 percent full.
For appliances designed to use a CGA No.791 connection:
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use.
Only install the type of dust cap on the cylinder valve that is provided with the cylinder
valve.
Other types of caps or plugs may result in leakage of propane.
Note: Gas supply pressure: 5 to 250
