You can connect your MySpace
TM
to your home or office Wi-Fi to control it remotely
and monitor its operation.
Connecting Your MySpace
TM
to Your Wi-Fi
(Infrastructure Mode)
By viewing these screens on your MySpace
TM
,
you can get the information you need to
connect your device to Wi-Fi.
Step 1: Search your MySpace
TM
(SSID) on Wi-Fi search list on your preferred device
Step 2: Select your MySpace
TM
Step 3: Put in the password shown on your MySpace
TM
screen (admin007)
Connecting to Your MySpace Wi-Fi
(Access Point Mode)
Step 1: Open your browser on your preferred device
Step 2: Type in the IP address 192.168.4.1 in the address bar of your browser
Step 3: Once you are on the login page, type in your home or office wireless SSID
name under SSID section
Step 4: Put in your home or office wireless SSID password (WPA2) under the password
section
Step 5: Leave the server and port details as it is, by default values should be present
in those sections
Step 6: (only if required) If server and port sections have no values, then type in the
following:
Server: ohair.hydroxyl.info
Port: 1883
Once Connected
Your MySpace
TM
enables you to control and monitor the device over your wireless
network. When you connect your MySpace
TM
with any of the smart devices, your
device will either warn you about no internet connectivity or in some cases your
device might disconnect from your MySpace
TM
and reconnect to one of your saved
networks that happen to be within range. To overcome this problem:
Samsung and HTC Devices (Android Platform)
Please switch ‘off’ your smart network switch option before connecting your
MySpace.
Nexus Devices
When prompted to stay connected or disconnect from wireless network with no
internet connection, select ‘yes’ to stay connected.
Wi-Fi Tips
Wi-Fi tips continued on the next page...
Page 3
Plug your Hydroxyl Generator into power, your display will illuminate to one of these
two states:
Getting Started
Indicates unit is on
Indicates unit is off
Fan Speed Increase
Fan Speed Decrease
NOTE:
Power button ( )
can be tapped once
to turn the device
on or off.
NOTE:
ON/ OFF option
will not work
on this screen
Language Selection
Once on the language selection menu (see previous section ‘Getting Started’), select
the language that you want using the up and down arrows ( ) and then press
centre button ( )) to confirm selection and apply the language to the menus. You will
see an asterisk (*) on the selected language.
Powering On/Off the Device
To turn your MySpace
TM
on or off, navigate your menu screen to any screen except the
language screen using the left and right buttons ( ), then tap the centre button
( ) once to turn your device on or off. Please note that device on/off option does not
work on language screen.
Menu Screen Standby/Wakeup
Your MySpace
TM
is designed to conserve energy and provide you with a distraction
free experience, therefore the menu screen of your MySpace
TM
will go into standby
mode after 30 seconds of inactivity. In order to wake the menu screen, tap any of the
buttons once.
MAIN
SCREEN
Page 2
