Ogura Industrial Corp, Somerset, NJ, USA www.ogura-clutch.com
1-2. Handling Precautions
Do not allow water or oils to adhere (do not apply).
Since the clutch and brake are for dry type, the torque will drop significantly if oils
adhere to the friction surface. Therefore, the machine may coast or run away, causing
an accident or injury.
Do not hang the product with lead wires.
Do not pull or bend the lead wire protruding from the terminal block at an acute angle.
In particular, if you hang the product by holding the lead wire, the unit may fall on your
leg and cause an accident or injury. Be sure to carry the product itself when handling it.
Please be careful about the weight when installing / removing / transporting.
If you have a heavy product, you may get injured due to back pain or falling. Please be
careful when installing, removing, and transporting. Especially for products with
eyebolts, use a hoist etc. for work.
1-3. Precautions for Installation
Use a wire size that matches the power capacity.
If an electric wire with a small current capacity is used, the insulation film will melt and
insulation will be poor, which may cause electric shock and leakage, as well as cause a
fire.
Be sure to control the tightening torque of the bolts and prevent them from loosening.
