Ogura Industrial Corp, Somerset, NJ, USA www.ogura-clutch.com
3-2. Precautions for Installation
When installing, pay attention to the following points:
Fig 3. An example in which the MSU type is installed between the motor and the reducer to
start and stop the load.
Do not allow water or oils to adhere (do not apply).
Since the clutch and brake are for dry type, if oils adhere to the friction surface, the
torque will be significantly reduced and the function of the product will be impaired, so
please avoid it. If you use it in a place where oil or water can easily get in, attach a
protective cover.
Securely mount the installation on a solid flat surface.
For the casing installation surface, securely tighten the bolts to the specified torque on a
solid machined flat surface, and take measures to prevent loosening with adhesive,
spring washers, etc.
