Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive a plug-in SIM
(Subscriber Identity Module) card loaded with your subscription details,
such as your PIN, and available optional services.
Install and charge the phone
1. Remove the battery cover and the battery
.
If the phone is already on, first it turn off by pressing and holding on/off
key
2. Insert the SIM card
.
Make sure that the gold-colored contacts on the card are face down.
3. Install the battery.
4. Replace the battery cover.
5. Plug the charger into the phone.
6. Plug the charger into a standard AC wall outlet.
7. When the phone is completely charged (the battery icon
becomes still green), unplug the charger from the power outlet.
8. Remove the charger from the phone.
9. Switch the Phone On/Off
10. Enter Your Pin (Access Codes)
11. Dial the Phone Number Required
Low battery indicator
When the battery is low a warning tone sounds, the battery low message
displays and the empty battery icon blinks. If the battery level becomes
too low, the phone automatically turns off. Recharge your battery.
Note:
When the battery is discharged completely, and not used for a
while, the phone will not display the charging icon for a moment
while charging. The phone will display the charging icon after
that transition period.
Power On or Off
Press and hold Power On/Off button to turn it on and off
Enter your SIM card PIN, if requested.
Access Codes
There are access codes for your SIM card. These codes help you to
protect the phone against unauthorized use.
When requested for any of the code explained below, key-in the
appropriate code (displayed as asterisks) and press the
OK
key.
PIN
The
P
ersonal
I
dentification
N
umber or PIN (4-8digits) protects your SIM
card against unauthorized use. The PIN comes with the SIM card; see
the SIM card instruction provided with your card.
If you enter an incorrect PIN three times in succession, the code will be
disabled and cannot be used until you re-enable it by entering the PUK.
PUK
The 4 to 8-digit PUK (
P
ersonal
U
nlocking
K
ey) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If not, or in
case you have lost it, please contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key-in the PUK and press the
OK
key.
2. Enter a new PIN of your choice and press the
OK
key.
3. When the
Confirm New PIN
message is displayed, key-in the
same code again and press the
OK
key.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Please contact your service provider for a new card.
Pin Password
The 4 ~ 8 digits of password is required when you use the Call barring
function. You can obtain the password from your service provider when
you subscribe to this function.
8