44
45
establishing a Bluetooth* connection
If you have a Bluetooth
*
audio device (smartphone, tablet, laptop, etc.), you can pair it to the micro-
stereo. The Bluetooth
*
connection enables you to play back music recorded on your audio device
without using a cable.
Turn on the micro-stereo, and select the BT source by pressing the
BASS
TREBLE
button on the micro-stereo
several times or directly on the
BT
button on the remote control.
1.
BT
fl ashes on the display, indicating that the pairing mode is active.
2.
Then please refer to the user manual of your Bluetooth
*
audio device for pairing with the micro-
stereo. This is called
Oglo
#
MB-O-700-D
in the list of detected Bluetooth
*
devices.
3.
Pairing is successful when the
BT
indication becomes fi xed on the display.
4.
Start playback on your audio device.
5.
To stop playback, press the
button on the micro-stereo, remote control or your smartphone. Or
change the playback source on the micro-stereo or remote control.
•
This micro-stereo can be paired to all devices equipped with Bluetooth
*
wireless technology.
•
After pairing has been completed, the last stored Bluetooth
*
audio device will automatically reconnect
as soon as the Bluetooth* source is selected.
•
The device can only be paired to one Bluetooth* device at a time. To pair another device, cancel the
pairing of your Bluetooth* device and then repeat the previous steps 1 to 4 with the new device.
Using the remote control in Bluetooth
*
mode
•
Press this button to start playback.
•
Press a second time to pause playback.
•
Press again to resume playback.
Accesses the previous track.
Accesses the next track.
Incoming call detection
•
When a call is received or dialled, the smartphone pauses music playback. The transmission of music
from your phone to the micro-stereo is interrupted.
•
When the call ends, the phone resumes playback from the point where it was interrupted, and plays
the music back through the micro-stereo speakers.
Cancel the active Bluetooth* connection
If you want to cancel the pairing between the micro-stereo and your smartphone, to pair it with another
smartphone, press and hold the BT button on the remote control for 5 seconds. BT fl ashes again on
the display.
connecting a USB removable media
1.
Turn on the micro-stereo. Select the USB source by repeatedly pressing the
BASS
TREBLE
button on the
micro-stereo or the remote control.
2.
Playback starts automatically. To go directly to another track, use the
or
buttons.
The USB port also enables you to recharge your USB devices when the micro-stereo is
switched on, delivering a voltage of 5 V
500 mA, whatever the source selected.
