38
39
playing an audio CD
Your micro-stereo can play audio CDs as well as MP3s recorded on CD-R or CD-RW.
1.
Turn on the player using the
button on the appliance or the remote control. Select the DISC
source by repeatedly pressing the
BASS
TREBLE
button on the micro-stereo or by pressing the
CD
button on
the remote control.
2.
Press to open the disc compartment, then insert a disc (label side up).
3.
Close the compartment. The appliance loads the disc, and displays information about the
CD contents, such as the total time and number of tracks, on the screen. Playback then starts
automatically.
4.
For CDs containing audio fi les in MP3 format, the micro-stereo starts playback with the fi rst track of
the fi rst album in alphabetical order. To go directly to another track, press briefl y on the
and
buttons.
Basic functions
Starts, pauses or resumes playback.
Stops playback.
Accesses the previous track.
Press and hold to play backwards at an accelerated speed.
Accesses the next track.
Press and hold to play forwards at an accelerated speed.
INTRO
Plays the fi rst 10 seconds of each track.
SHUFFLE
Random disc playback.
ALBUM- /
ALBUM+
In MP3 playback, allows access to the next or previous folder.
Repeat
•
When playing an audio CD, you can select a repeat option. Press the
REPEAT
button to repeat a
track, a second time to repeat the entire disc, and a third time to disable repeat. The repeat symbol is
displayed on the top right of the screen.
•
When playing MP3 audio fi les, press the
REPEAT
button to repeat a track, a second time to repeat an
album, a third time to repeat the entire disc, and a fourth time to turn repeat off.
Programming a playlist
•
When the micro-stereo is stopped, press the
PROG
button, then select the desired track number
using the
and
buttons. Then press
PROG
again and select another track number.
•
Repeat as often as necessary (20 tracks maximum). Then press
to start playback. Playback
is in the order you have defi ned. Use the
and
buttons to navigate through your
programming.
•
Press the
BASS
TREBLE
button twice to cancel the programming.
listen to FM radio
1.
Connect the antenna cable supplied to the back of the micro-stereo, and extend it fully.
2.
Turn on the micro-stereo, and select the FM source by repeatedly pressing the
BASS
TREBLE
button on the
micro-stereo or the remote control.
Performing a full scan on the FM band
1.
When the appliance is turned on, briefl y press the
SCAN
button on the remote control or the
button on the micro-stereo to perform a full scan on the FM band. The fi rst thirty stations found are
stored.
Search for a radio station automatically
1.
Press and hold the
and
buttons for 2 seconds to perform an automatic scan.
2.
FM scanning stops when a radio station has been found.
3.
You can then briefl y press the
or
buttons on the remote control to refi ne your search,
as described in the next paragraph.
Search for a radio station manually
1.
Briefl y press the
or
buttons on the remote control until the optimal reception
frequency is reached.
2.
Each time the
or
keys are pressed, the frequency decreases/increases by 0.05 MHz.
3.
If reception is poor, adjust the FM antenna position or change the frequency.
