⚫
Use of distilled or de-mineralised water is recommended to prolong the life of the
steamer.
⚫
Use water only; do not use detergents or other chemical substances.
⚫
Mis-use will lead to an invalid guarantee.
Steaming Linens and Fabrics
⚫
Ensure the water tank has been filled and that the desired accessory is connected and
then follow the steps below
⚫
Plug the unit into the mains power supply and switch On if switchable.
⚫
Switch the unit On to indicate the appliance is on.
⚫
Steam will emit from the nozzle after approximately 130 seconds.
⚫
Direct the steam nozzle with either one of the accessories towards the material you wish
to steam.
⚫
Keep the flow of steam focused on the material being steamed.
⚫
Using a slight back and forth motion over the area you are steaming will further enhance
the process.
⚫
CAUTION: Always be sure that the Steam Nozzle and any other attachments are pointed
in a safe direction away from the user, other people and animals when steam is being
emitted.
Steaming Garments
⚫
Place the garment on a clean rust-free hanger.
⚫
Direct the steam nozzle towards the bottom of
the garment.
⚫
Steam will rise on both the inside and outside of
⚫
the fabric removing the wrinkles and creases.Slowly
slide the steam nozzle
⚫
upwards from the bottom to the top of the garment.
⚫
Direct the steam nozzle away from the garment and smooth the fabric with your free hand
⚫
Repeat as necessary until the garment is crease-free.
Storage
⚫
Unplug the power cord from the mains power supply.
⚫
Allow the unit to cool thoroughly (at least 60 minutes).
⚫
Remove all attachments from the unit.
⚫
Drain the remaining water from the water tank to minimise potential mineral build-up.
Loosely replace the water tank cap but do not tighten as it may be difficult to unscrew for