Ofs Kintra, Руководство по сборке

Страница: 9 / 11

9 ofs.com imagine a place® 800.521.5381 Assembly instructions
Kintra assembly instructions
Two piece top, no shelf continued
STEP 2
1. Set the beam assembly onto the top. Do not attach at this time.
2. Connect end panels to top by pressing mitered edge of end panel to the mitered
edge of top. Insure that mitered seam is tight and the end panel bottom edge is
aligned along the bottom edge of the miter.
3. Use 1 ½” screws from HK-212 to secure the end panel internal leg assemblies to the
top.
4. Center the beam unit on the top. Using ¾” screws from HK-37 attach the beam
assembly to the top utilizing the pre attached L-brackets.
5. Secure the beam assembly end panel to the end panel of the unit using 2” screws
from HK-102
STEP 3
1. Unit can now be fl ipped right side up and placed in desired location
HK-37 3/4" screws to attach
L brackets
Align edge with shelf
Ensure tight fi t when
securing together
HK-212 1 ½ " screws
HK-102 2" screws