Ofs Kintra, Руководство по сборке

Страница: 8 / 11

8 ofs.com imagine a place® 800.521.5381 Assembly instructions
Kintra assembly instructions
Two piece top, no shelf
STEP 1
1. Place two piece top, face side down, on a non marring surface.
2. Install clamp plates from HK-6. While pulling both sections together making sure
the seam is tight, center the 4x4 plates over the seam and use the screws provided
to attach. Use caution not to locate plates where the long beams of the beam
assembly will sit onto the top.
3. Using ¾ " screws from HK-37, attach 1" square tube supports along inside of the
under frame rail of the top. Use pre-drilled location holes to locate.
Install fl at plates (HK-6)
and tube supports with
HK-37
Beam assembly is shipped in
seperate carton. Unbox and
set aside
SHIPPING
1. Images below show how unit will be shipped