Ofs Kintra, Руководство по сборке

Страница: 10 / 11

10 ofs.com imagine a place® 800.521.5381 Assembly instructions
Kintra assembly instructions
Two piece top, with shelf
STEP 1
1. Place top, face side down, on a non marring surface.
2. Install clamp plates from HK-6. While pulling both sections together making sure
seam is tight, center the 4x4 plates over the seam use screws provided to attach.
Use caution not to locate plates where the long beams of the beam assembly will sit
onto the top.
3. Using ¾” screws from HK-37 attach 1” square tube supports along the inside of the
under frame rail of the top. Use pre-drilled location holes to locate.
Install fl at plates (HK-6) and
tube supports with HK-37
Beam assembly is shipped in seperate
carton. Unbox and set aside.
Shelves are shipped in seperate
carton. Unbox and set aside.
SHIPPING
1. Images below show how unit will be shipped