PART # 1609138
END LEG
INSTALLATION INSTRUCTIONS
ELEVEN WOOD
1. Begin by locating the large diameter hole on top of the end legs. Next, drop the threaded cross dowel
into the hole, making sure the slotted end is facing up. Then insert the threaded rods into the clearance
hole in the leg and fasten it halfway into the cross dowel.
2. Next, attach the legs to the frame rails making sure the holes in the leg align with the dowel pins in
the frame rail and that the threaded rod in the leg can be inserted into the frame rail. Locate the “D”
shape pockets inside the frame rails and attach the rectangular washer, followed by the flange nut.
Tighten the nut using a 1/2" wrench.
3. The frame is now fully assembled and can be mounted to the worksurface. Verify the frame is
centered completely and fasten it to the worksurface using the supplied screws.
CROSS DOWEL
THREADED ROD
FRAME RAIL
DOWEL
PIN
NOTE: If your table has intermediate legs, they should be assembled
prior to installing the end legs.
