PART # 1609142
66" ROUND AND SQUARE TABLES (66RT & 66SQT)
INSTALLATION INSTRUCTIONS
ELEVEN WOOD
1. Begin by removing the hex nuts and flat washers from the threaded studs on each of the table legs.
Attach the leg to the frame assembly by inserting the threaded studs into the corresponding holes in
the frame as shown in the view in the upper right corner.
2. Next, re-attach the flat washer and hand tighten the hex nut onto the threaded stud. Repeat the
previous steps for the remaining table legs. To complete the assembly, fully tighten all the hex
nuts using a 1/2" wrench.
3. Once the frame has been fully assembled, place the frame onto the bottom of the worksurface.
Position the frame so that it is completely centered onto the worksurface, making sure that
“dimension A” is the same value on all four sides. Secure the frame to the worksurface by
fastening the supplied screws through the mounting holes in the frame and into the worksurface.
THREADED STUD
HEX NUT
FLAT WASHER
FRAME
