background image

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

26

Safety Precautions

Failure to follow these precautions could cause explosions or leaks resulting 

in fire, injury, and damage to the surroundings. If the battery inside the unit 

leaks and you or your clothing comes in contact with the leaking substances, 

immediately flush with large amounts of water and seek medical assistance.

•  Before using the MudChecker please be sure to read the safety precau-

tions described.

• 

Always be sure to operate the equipment correctly.

•  The safety precautions below are intended to instruct you in the safe 

and correct operation of the unit and its accessories to prevent injuries 

to yourself or other persons and damage to the equipment. ‘Equipment’ 

refers to the MudChecker unit itself, the power adapter supplied, and the 

USB lead also supplied.

• 

Do not attempt to disassemble or alter any part of the equipment that 

is not expressly described in this guide. Opening the equipment or 

tampering with its seals will invalid the warranty and is in breach of the 

terms and conditions of sale.

• 

The equipment contains no user serviceable parts. Do not attempt to 

open or dismantle it.

• 

Stop using the equipment and switch the unit off immediately if it emits 

smoke or fumes. Contact OFITE immediately.

• 

Do not use the equipment if it has condensation on or in it, or if you 

have wet hands.

• 

Do not allow the body of the equipment to be immersed in water or 

any other liquids. If it does:

 

○ Immediately turn the unit off and disconnect the USB lead. Con

-

tinuing to use the equipment could result in fire or electrical shock.

 

○ Wipe all wet items dry with a soft, absorbent cloth.

 

○ If the unit has been immersed, please consult your OFITE directly.

•  The gaskets on the unit case should be inspected regularly for signs 

of swelling and wear. If this occurs, please advise your OFITE.

• 

Damage to the unit enclosure or top lid may significantly degrade the 

IP rating of the unit. Such damage should be discussed with OFITE.

Safety

Содержание MudChecker






























Отзывы: