OfiTE 120-60 Скачать руководство пользователя страница 6

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

5

4.  Edit Setpoint 2 / Increase Setpoint Digit

Press this button to change the timer value of Setpoint 2. When 

editing a setpoint value, this button increases the second digit of 

the value by 1.

5.  Increase Setpoint Digit

This button increases the fourth digit of the setpoint value by 1.

6.  Increase Setpoint Digit

This button increases the third digit of the setpoint value by 1.

7.  Enter Button

Press this button to store the Setpoint value in memory.

8.  Timer Reset

Press this button to reset the timer to zero.

9.  Keypad: VAR

This button accesses the PID Parameter Control Menu.

10. Keypad: SETPT

Press this button to change the rotational speed of Setpoint 1 or 

Setpoint 2.

11. Keypad: ENTER

Press this button to store the Setpoint value in memory.

12. Two-Way Switch: ON - OFF 

This switch provides power to the unit.

13. Two-Way Switch: MAN/AUTO - Variable

This switch determines the operating mode of the unit. If it is set to 

MAN/AUTO, the MAN - AUTO switch (15) becomes active. If it is 

set to VARIABLE, the unit will be in Variable Mode.

Содержание 120-60














Отзывы: