OfiTE 120-05 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 41

OfiTE 120-05 Скачать руководство пользователя страница 15

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

14

Software

Setup

1. Double-click the “Multi Consistometer” icon on the PC desktop.

2. To add a new unit, click “Add New”.

3. Select “Consistometer” from the list.

4. Enter a name. The name must be different from all other Consistometers

connected to this PC.

5. Enter a slave ID. The slave ID must be different from all other

Consistometers connected to this PC.

6. Choose the COM port the new Consistometer is connected to.

7. Chose a folder to save the test data. It is recommended that each

Consistometer have its own data archive folder.

8.

Choose a logo file (.jpg) to display on the printed chart.

9. Select “With Pressure” if you want pressure data to print on your graph.

This feature is only available on units with a Eurotherm pressure indicator.

Units with an AMETEK/Dixson pressure indicator cannot print pressure on

the graph.

10. Select “With Pressure Control” if you want to control pressure from the

software.

This feature is not available on all units.

«
...
13
14
15
16
17
...
»

Содержание 120-05










































Отзывы:

Нет отзывов