63-58612/63-51712/68-11712
MANAGERS CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products November 2006
PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . 1
4. Mechanism . . . . . . . . . . . . . . . 1
5. Seat Cushion . . . . . . . . . . . . . . 1
6. Back Assembly . . . . . . . . . . . . 1
7. Arms (7L & 7R) . . . . . . . . . . . . 2
8. Back Support (pre-installed) . . 1
9. Allen Screws . . . . . . . . . . . . . . 3
10. Arm Screws . . . . . . . . . . . . . . 6
11. Mechanism Screws . . . . . . . . 4
12. Allen Wrench . . . . . . . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Align holes in Arms (7L & 7R) with holes in Seat Cushion (5), and secure using three Arm Screws (10) for
each arm,
FULLY TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER (not provided).
STEP 3
Attach Mechanism (4) to Seat Cushion (5), with arrow pointing towards the from of the chair, secure Mechanism (4) using four
Mechanism Screws (11),
FULLY TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER (not provided).
STEP 4
Attach Back Support (8) to Mechanism (4) using three Allen Screws (9),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 5
Insert Pneumatic Cylinder into Base (1), place assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
Phillips Screwdriver also needed for
assembly (not provided)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
X5
X3
X4
X3
X3
5
5
1
2
3
4
6
7L
8
10
10
7R
11
9
4
12
