Important notes
Epicondylitis support
The Dynamics Plus epicondylitis
support
targets the causes of tennis el-
bow and golfer’s elbow. The large Plus Pad
absorbs the vibration that is caused by
hand and fi nger movements. This prevents
irritation from being transferred to the
elbow, so that the infl ammation of the mus-
cle attachments can abate.
Please note
– The initial adjustment and strapping on of the prod-
uct must be carried out by qualifi ed specialist staff.
– Wear the product directly on your skin. If it has to
be worn in combination with other products, please
discuss this with your doctor beforehand.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, intense
pain or any other problem when wearing the product,
then remove it and contact your doctor or specialist
supplier.
– We use a comprehensive quality assurance system
to check our products. However, should there still be
reasons for complaint, please contact your specialist
supplier.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
Plus product.
Ofa Bamberg wishes you a speedy
recovery!
←
Fitting instructions
The fi tting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
To put on the support, open the elastic strap. Pull the
wider end of the support over the forearm, not over
the elbow. With tennis elbow the pad must lie on the
dorsal side of the forearm, and with golfer’s elbow it
must lie on the ventral side. Please wear the support
directly on the skin – this is the only way to obtain the
desired effect.
2
The separate Velcro strap can be worn in order to
obtain a better fi t. Attach the narrow hook strip of
the strap to the loop strip on the support. Now lead
the strap around the arm and fasten it loosely. Please
ensure that the product is secure but not too tight in
order to avoid pinching.
